Arbor press adaptor 10mm drilled ram to M8 x 1.25 threaded to fit 'The Green Machine Hand Press' hole punches and setting dies

A machined brass Arbor press adaptor for use with M8 x 1.25 threaded 'The Green Machine Hand Press' hole punches and setting dies ...

Main Features:

• Arbor press adaptor allows punches and setting dies designed with a M8 x 1.25 thread commonly marketed as compatible with 'The Green Machine Hand Press' to be used with a professional arbor press with a drilled ram (10mm diameter).
• Compatible with most 0.5-tonne and 1-tonne arbor presses provided that the ram has a 10mm diameter drilled hole that is at least 16mm deep.
• M8 x 1.25 threaded hole punches and setting dies are easy to find and purchase online and are perfect for use in leatherworking applications.
• Manually machined from solid brass stock.
  
• Brushed finish.
• Handmade in England by Fenner.

NOTE: The pictured hole punches and arbor press are for illustration and are NOT included in the sale.

Description:

With an abundance of M8 x 1.25 threaded hole punches and setting dies for 'The Green Machine Hand Press' available at relatively low cost online, these make great tools for use in leatherwork applications. I have designed this adaptor to allow the use of these readily available hole punches and setting dies with a professional quality heavy-duty arbor press. If you have any questions about compatibility please contact me and I will be happy to assist.

Product Dimensions & Compatibility:

Made to fit 0.5-tonne or 1-tonne arbor press provided that the ram has a 10mm diameter hole with a grub screw.

The M8 x 1.25 thread measures 8.00mm in major diameter. Hole punches and setting dies are available widely online including eBay and are usually described as being compatible with 'The Green Machine Hand Press'.

Two-part setting tools will require the use of a suitable base to hold the lower setting die.

If you are at all unsure about the thread standard or the compatible press tools please contact me.

Dimensions (all stated sizes are approximate): Overall Height: 35mm / Width (at widest point): 19mm. 10mm dia. x 16mm long post. M8 x 1.25 threaded hole is 13mm deep to accept most hole punches and setting dies.

Available Colours / Finishes:

This product is available made from the following metals:

• Brass
  

Notes:

Product Photography: Unless otherwise stated pictured accessories are shown for illustration purposes only and are not included in the sale. Products may have been photographed in varying lighting conditions such as daylight or under studio lighting therefore the exact colour or tone may appear slightly different under different lighting conditions.